Easy Clean Pipeline Separator

Easy Clean Pipeline Separator

Product Specification:

  • Material  316L / 304L
  • Size to suit application
  • Hygienic design
  • Min. Fe-particle size that can be caught 30 µm
  • Max. operating temperature 60 °C (Higher temp designs available)
  • Surface Finish Bead Blast (standard) other finishes available
  • Seal FDA / Metal Detectable (Other elastomers available)
  • Pressure + / – 10 Bar (High pressure designs available)
  • Field strength (flux density) on extractor tube (±5%) 7000 or 9000 gauss
  • ATEX Zones Gas Zones 0, 1, 2 and Dust Zones 20, 21, 22

Product Information:

Easy Clean Pipeline Separator PS0501

The Pipeline Magnetic Separator is ideal for the removal of ferrous and paramagnetic particulates from a range of liquids and free flowing dry products, and is therefore suitable for filtration of products within the foodchemical, pharmaceutical, ceramicanimal feed and gas and oil industries. The Easy Clean Pipeline Separator is a fully bespoke product and can be designed to fit any size of pipeline, with flanges and fittings to suit each customer’s requirements.

As product flows past the powerful magnetic bars, ferrous particles as small as 30 microns and tiny paramagnetic particles such as stainless steel scrapings are filtered out. These very fine ferrous and stainless steel particles are smaller than can be detected with a metal detector.

Cleaning is simple and efficient. With product flow stopped, the extractor tube unit can be removed from the pipeline. The magnetic bars can then be pulled out of the extractor tubes, causing the contaminant particles to fall off. The images below show the unit in the closed and open positions.

Where required, this separator can also be designed with a water jacket to provide an insulating layer to maintain product temperature.

Electrical interlocks or safety switches can be fitted to this separator to either prevent the extractor tube unit from being accidentally opened during the production process or to shut down product flow should the unit be opened during production.

This product can be designed to international pressure vessel design codes (ASME VIII, EN13445 and PD5500) and can be manufactured to be Pressure Equipment Directive (PED) 97/23/EC and ATEX 2014/34/EU compliant.

For advice or a quote, please contact us.

Alternative products:

For information on these alternative products that may be of interest, please click on the Products link in the menu bar.